Dirty water pump 3 - 50,000 l/h - 7hp petrol
Powerful water pump, suitable for lightly to moderately polluted water such as sewerage works, construction sites, water works in agriculture and horticulture, ditches, drainage and irrigation, etc.
Characteristics:
Flow rate of 50 m³/h (50,000 l/h)
Suitable for polluted water and impure water
Pumps small sand particles up to 5mm
Thick-walled and reinforced aluminum pump construction, with durable cast iron impeller, resistant to the higher resistance of contaminants
Pump housing with ergonomic, longer mounting screws for easy opening and freeing of the interior
3” (76mm) input and output
7 hp 4-stroke petrol engine 270cc
3.6 gallon fuel tank
Closed steel supporting structure with vibration dampers, provides perfect protection on construction sites, for example. The frame also provides support for easy moving or tying down in demanding conditions
Self-priming pump
4-stroke petrol engine with manual start
Quickly and easily connect the hoses and start pumping
Portable for 1 person
Delivered with:
Connection set in aluminum for suction and discharge side
2 plug-in sleeves 4” with PP seals, with hose clamp
Suction strainer for filtering coarse contaminants
Options:
Engine oil 650 15w40 5l (art 790030050)
Flat delivery hose PVC 76mm (3”) length 50m, 10 bar (art 724562295)
Reinforced suction hose PVC 76mm (3"), 5m (art 724562285)
Alternatives:
1” pure water pump 10,000l/hour - wp1000 - (art. 724562265)
2” pure water pump 18,000l/hour, high pressure type - wp1800p - (art. 724562266)
3” pure water pump 48,000l/hour - wp4800 (art. 724562267)
4” pure water pump 86,000l/hour - wp8600 (art. 724562275)
3” dirty water pump 50,000l/hour – wp5000sl (art. 724562276)
3” chemical pump 49,000l/hour – wp4900ch (art. 724562277)
Note: This pump is not a mud pump
Engine 7 hp 4-stroke
Cylinder capacity cc 212
Fuel tank l 3.6
Fuel consumption l/h 1.64
Oil capacity L 0.6 L
Autonomy u 2,2
Connection inch 3 inch (76mm)
Flow rate m³/h 50
Head m 20
Suction height m 7
